50 FT.  DIVE EXCURSION BOAT

 

General Specification & Standard Outfitting

Built on a proven Dutch Motor Yacht Hull Design for operation in Maldives for Dive Excursion, Whale Watching and Pleasure Cruising in Coastal Waters and Ocean Going.

 
DIMENSIONS
 
   
 
 Length Overall 
49 Ft. 08 inches (15.15 Meters) 
 
Beam
15 Ft.07 inches (   4.75 Meters
 
Draft (Unloaded)  
05 Ft.03 inches (   1.61 Meters) 
 
Displacement (Unloaded)  
20.8 Tons. approx. 
 
Carrying Capacity  
25-30 Passengers 
 
Engine  
1x 320 HP Doosan Engine Mdl.196 TI 
 
Fuel Tanks Capacity   
1500 Liters. 
 
Fresh Water Tanks Capacity
500 Liters. 
 
Speed
 11-13 Knots 
 
Endurance  
24 Hours @ Cruising Speed 
 
   

 

 

  

GENERAL ARRANGEMENT

HULL - FIBRE GLASS HULL REINFORCED WITH POLY URETHANE FOAM TRANSVERSE FRAMES AND LONGITUDINALS GLASSED
DECK - FIBRE GLAS DECK WITH MOULDED NON SKID SURFACE.

 

DECK LAYOUT AND EQUIPMENT

Moulded nonskid surface GRP Decks
Fore Peak Anchor Locker with access deck hatch
01 No.800 KG maximum pull capacity 24 Volt DC electric anchor windlass with anchor
02 Nos. Fwd. Deck Mooring Bollards
02 Nos.  Aft Deck Mooring Bollards
Stainless steel safety deck railing fitted around gunwale with entry from port and stbd. sides
GRP hull incorporated swim platform fitted to stern with boarding ladder 

 

FWD. CABIN

U type settee/berth fitted to front
Galley area with sink and granite work top fitted aft to port .Toilet compartment provided to starboard.
Fitted with a marine WC and wash basin. Pressure fresh water supply with taps provided in galley and toilet Compartments.

 

MAIN SALOON

Helm position to starboard front with a console fitted with steering wheel, instrumentation and controls Within easy reach of the Helmsman.
U shape settee with tables fitted to port for seating and dining
Additional L shaped settee fitted to starboard with a table. 
Entry through opening type flap doors fitted to aft centre from the cockpit.

 

COCK PIT SEATING

Sating area with an overhead coach roof and side with openings fitted with fibre glass seating to port and Starboard.
Aft cockpit floor kept for easy movement on aft deck.

 

FLY BRIDGE

Entry up from a circular stairway from the cockpit
Secondary helm position fitted to front starboard with helm console fitted with steering wheel, instrumentation & controls.
Auxiliary Helm position fitted to starboard front with a helm console fitted with steering wheel and controls  & instrument.
Acrylic glass wind screen fitted to front with safety railings aft.
Seating provided aft.
GRP hard top canopy fitted over fly bridge area

 

ENGINE

Water tight Engine, Generator and Rudder hull compartments fitted under the cockpit floor with access From hatches provided on cockpit..
Engine connected to stainless steel shaft which run through a GRP stern tube fitted with water lubricated Cutlass bearings connected to a manganese bronze propeller.

 

ELECTRICAL SYSTEM

24 Volt DC Main Electrical System
Fitted for interior & exterior lighting. Navigation lights and running of Anchor Windlass, submersible bilge pumps, blowers and extraction fans.
2 Nos. (24 Volt x 200 Amp) Battery Banks provided for engine start and services.
Front screen wipers/Horn & Remote control search light fitted
230 volt AC Lighting. System provided from 14 KW Marine Generator for running of air conditioning and Emergency lighting system. 

 
 

LAYOUTS

0 1 2

EXTERIOR/INTERIOR


TOP